Part Finder

Fill voids to prevent animal or liquid incursion.  Use on potheads, conduits, pipes, seams, gaps and more. Can also be used to replace custom gaskets and build channels to divert liquid away from dangerous areas. Works on masonry, PVC, ABS, metal, wood, ceramic, glass, and more.

*Putty is malleable and may slightly shift or change thickness over time, putty requires careful application for high voltage uses. If necessary, pack more putty to increase its dielectric strength.
**May stain some surfaces.

Fits round, flat or angle bus ranging from 4.00in (10.16 cm) to 6.00in (15.24 cm).

Install E/Insulation on conductors, cables and jumpers with greater ease compared to applying by hand. Works on E/Insulation up to 0.75in.

Split line silicone hose for insulating bus against phase-to-ground or phase-to-phase wildlife contact.

Split line silicone hose for insulating bus against phase-to-ground or phase-to-phase wildlife contact.

Split line silicone hose for insulating bus against phase-to-ground or phase-to-phase wildlife contact.

Install on hat channel or U-channel ground with one or more insulators to prevent phase-to-ground wildlife contact with disconnect switches.

Rolls of silicone sheet material that can be cut to form around any complex objects to insulate against phase-to-phase and phase-to-ground wildlife contact. Use in conjunction with lineman scissors, E/Hole Punch and E/Push Pins to create a custom cover for any energized equipment.

Rolls of silicone sheet material that can be cut to form around any complex objects to insulate against phase-to-phase and phase-to-ground wildlife contact. Use in conjunction with lineman scissors, E/Hole Punch and E/Push Pins to create a custom cover for any energized equipment.

Insulates flat bus up to 4in (101.6mm) width. Sold in 5ft (1.5m) pieces.

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase wildlife contact.

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase wildlife contact.

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase wildlife contact.

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase wildlife contact.

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase wildlife contact.

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase wildlife contact.

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase wildlife contact.

Switch cover designed for Schneider or ABB switch assemblies on distribution circuits.

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase contact. Great for protection from brush contact.

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase contact. Great for protection from brush contact.

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase contact. Great for protection from brush contact.

Fits both one and two bushing capacitors.

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase contact. Great for protection from brush contact.

T-shaped silicone extrusion for insulating T-beam bus bar against phase-to-ground or phase-to-phase wildlife contact.

Insulates flat bus up to 3.25in (82.55mm) width. Sold in 5ft (1.5m) pieces.

Angled extruded silicone for insulating angle bus bar up to 3.25in against phase-to-ground or phase-to-phase wildlife contact.

Angled extruded silicone for insulating angle bus bar up to 4.00in against phase-to-ground or phase-to-phase wildlife contact.

Split line silicone hose for insulating bus against phase-to-ground or phase-to-phase wildlife contact.

Split line silicone hose for insulating bus against phase-to-ground or phase-to-phase wildlife contact.

Split line silicone hose for insulating bus against phase-to-ground or phase-to-phase wildlife contact.

Split line silicone hose for insulating bus against phase-to-ground or phase-to-phase wildlife contact.

Split line silicone hose for insulating bus against phase-to-ground or phase-to-phase wildlife contact.

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase wildlife contact.

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase wildlife contact.

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase wildlife contact.

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase wildlife contact.

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase wildlife contact.

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase wildlife contact.

Split line silicone hose for insulating conductor cables, leads and jumpers against phase-to-ground or phase-to-phase wildlife contact.

Self-fusing silicone wrap used to insulate complex utility equipment up to 50kV including terminations, connections, cables and more.

Self-fusing silicone wrap used to insulate complex utility equipment up to 50kV including terminations, connections, cables and more.

Self-fusing silicone wrap used to insulate complex utility equipment up to 50kV including terminations, connections, cables and more.

Self-fusing silicone wrap used to insulate complex utility equipment up to 50kV including terminations, connections, cables and more.

Self-fusing silicone wrap used to insulate complex utility equipment including terminations, connections, cables and more.

Self-fusing silicone wrap used to insulate complex utility equipment including terminations, connections, cables and more.

Self-fusing silicone wrap used to insulate complex utility equipment including terminations, connections, cables and more.

Self-fusing silicone wrap used to insulate complex utility equipment including terminations, connections, cables and more.

Self-fusing silicone wrap used to insulate complex utility equipment including terminations, connections, cables and more.

Self-fusing silicone wrap used to insulate complex utility equipment including terminations, connections, cables and more.

Fits capacitors up 3.4in wide.

Insulate a bushing with a height up to 10.86in (275.84mm) and a width of 6.7in (170.18mm).

Insulate a bushing with a height up to 11.8in (299.72mm) and a width of 6.7in (170.18mm).

Protects ground stud connectors from animal contact.

Protects ground stud connectors from animal contact.

Protects ground stud connectors from animal contact.

Prevents animals from climbing over substation fences and birds from roosting on cross arms.

Spring-loaded hole punch for modifying E/Covers and E/Silicone Sheets to eliminate gaps.

Long lasting alternative to temporary plastic tie wraps or zip ties. Each bag contains 10 ties.

Long lasting alternative to temporary plastic tie wraps or zip ties. Each bag contains 10 ties.

Long lasting alternative to temporary plastic tie wraps or zip ties. Each bag contains 10 ties.

Pins used to secure Midsun molded covers and silicone sheets. Included with covers. Sold separately in bags of 50.

Hot stick attachment for Anti-Nesting barriers enabling energized installation.

Angled barrier that blocks wildlife from utility equipment while preventing animals from roosting in the area.

Angled barrier that blocks wildlife from utility equipment while preventing animals from roosting in the area.

Barrier assembly that includes a large disc and 10 slippery rotating collars that prevents climbing animals access via overhead power lines in open air substations.

Insert for 20in and 24in E/Flex Barriers that enables fitting to smaller core insulators.

Insert for 16in E/Flex Barriers that enables fitting to smaller core insulators.

One piece disc-shaped barrier that blocks wildlife from contact with power equipment.

One piece disc-shaped barrier that blocks wildlife from contact with power equipment.

One piece disc-shaped barrier that blocks wildlife from contact with power equipment.

One piece disc-shaped barrier that blocks wildlife from contact with power equipment.

One piece disc-shaped barrier that blocks wildlife from contact with power equipment.

One piece disc-shaped barrier that blocks wildlife from contact with power equipment.

Self-fusing silicone wrap used to insulate complex utility equipment including terminations, connections, cables and more.

Pins used to secure Midsun molded covers and silicone sheets. Included with covers. Sold separately in bags of 50.

Designed to fit either pole top bushings or lightning arrestors with a pass-through lead.

Silicone cover designed to cover underground termination bushings.

Designed to fit taller lightning arrestors with a pass-through lead or pole top bushings.

Silicone cover designed to protect various sizes of termination substrates. Allows for a quick on/off application.

Silicone cover designed to fit large bushings with double right angle lead connections.

T-shaped for use on recloser T-Sensors.

Designed for pole top right angle lightning arrestor.

Designed for pole top arrestors with a single lead at a right angle. It may also be used for pole top right angle bushings.

Fits standard cross-arm pin insulators.

Fits large cross-arm pin insulators.

Fits standard cross-arm pin insulators.

Fits multiple substation lightning arrestors. Adapts to different bus and lead connections. Easy on/off application.

Adds 6.80in (172.72mm) to the width of the E/Bushing Cover Large.

Cone that attaches to E/Bushing Cover Large Right Angle Extension.

Adds 5in (127mm) to the top width of the E/Bushing Cover Large.

Adds height to E/Bushing Cover Large Height Extension.

This extension gives an additional 6.10in (154.94mm) to the height of E/Bushing Cover Large.

Adds an additional 6.8in (172.72mm) to the width of the E/Bushing Cover Large and also features a right angle exit point.

For use on larger fuse cut-out switches. The design allows for easy opening and closing of the fuse.

For use on fuse cut-out switches. The design allows for easy opening and closing of the fuse.

Fits right-angle recloser sensors.

Insulates the bottom sensor of a *Fisher Pierce current sensor.

Fits large cross-arm pin insulators.

Accommodates bushings with multiple lead connections.

Designed for pole top arrestors with double leads at a right angle.
It may also be used for pole top right angle bushings.

Insulates the bottom sensor of a Fisher Pierce current sensor.

Designed to protect energized portion of capacitor bushings.

Fits small station service transformer bushings, PT’s and CT’s, and pole-top transformer bushings with a height of 6.40in (162.56mm) and with a bottom opening of 3in (76.20mm).

Designed for recloser bushings. The perforated bottom allows it to fit various sized bushings up to 11.50in (292.1mm) high with an opening of 5.90in (149.86mm) wide.

Cap for E/Bushing Cover Right Angle Extension.

Accommodates bushings with multiple lead connections.

Fits small station service transformer bushings, PT’s and CT’s, and pole-top transformer bushings, from 6.90in (175.26 mm) high with an opening of 5.20 in (132.08mm)

Fits medium-sized transformer breaker, regulator bushings, and arrestors. Will fit bushing diameters up to 5 in., 127.0 mm.

Fits large bushings with double right angle lead connections.

Fits flat, angle or round bus ranging from 4.50 in (114.3 mm) to 5.50in (139.7 mm)

Fits round, flat or angle bus ranging from 0.50in (12.7 mm) to 3in (76.2 mm).

Fits round, flat, or angle bus insulators
ranging from 3in (76.2 mm) to 4.50in (114.3 mm).

Semi-exposed walls allows for easy IR inspection and visibility while covering large bushings with a double or single lead connection.

Semi-exposed walls allows for easy IR inspection and visibility while covering large bushings with a double or single lead connection.

Fits larger single or double lead right angle bushing connections.

Insulates bushings with a skirt diameter up to 8in (203.2mm). Use E/Bushing Cover Large Extensions to add width and height to this cover.