Photo Gallery
STOPAQ® APPLICATION
Location: East Coast
Year: 2014
Reason: Parts of the switchgear cabinet were severally corroded. This allowed water to enter the switchgear cabinet causing a slipping hazard and a potential flash. Stopaq® was applied to various spots to give a permanent solution for the problematic areas. Since the application, the customer has not experienced any leakage.
This application was completed by Midsun applicators.
After the application of Stopaq®, we applied Midsun Silprocoat over the entire switchgear cabinet. This allowed for complete apparatus protection.
MIDSUN SILPROCOAT
Location: East Coast
Year: 2013
Reason: The entire apparatus was corroded. Midsun Silprocoat was applied to all of the switchgear cabinets in the substation which eliminated all problematic areas. Application included sides, base, roof and under passage of the switchgear cabinet. The coating can be applied multiple ways which allows the applicator to coat virtually any area.
This application was completed by Midsun applicators.
MIDSUN HIGH VOLTAGE INSULATOR COATING
Location: West Coast
Year: 2013
Reason: Midsun HVIC high voltage insulator coating was applied to new breaker bushings before they were installed. This is a proactive solution in a highly contaminated area. This will significantly reduce to eliminate the need to regularly washing the insulators. By applying Midsun high voltage insulator coating, the customer will protect the breaker bushings from flashing due to contamination. The customer has not experienced any flashovers and they have not washed the insulators since the application.
This application was completed by Midsun applicators.